Netac Tech T600 User Manual download pdf (Page 20)

Netac AirTrack T600 Mini Wireless Router

Table 5.4 AP Router Mode - Advanced Settings

Field Description

Beacon Interval Beacon interval (milliseconds).

RTS Threshold RTS threshold.

DTIM Interval DTIM interval.

Protection Mode Allows user to force 802.11g Protection (RTS/CTS) mode off.

Transmit Rate Select transmit rate: Auto (Default) or a fixed rate.

Preamble Type Select: Short preamble, Long preamble or Auto.

Connect Repeater Disable/Enable the use of a Repeater.

Repeater MAC Address

MAC address for each Repeater. Up to two Repeaters can be connected.

5.1.2.1 Connect Repeater

Up to two Repeaters can be connected. If a Repeater is used along with the Access Point, the settings steps

are the following:

1. Go to the Advanced Settings Page.

2. Select Enable for the Connect Repeater field.

3. Enter the MAC address for each Repeater in the Repeater MAC Address field.

5.1.3 AP Router Mode - Access Filter (MAC Filter List) Setup

Click the Access Filter: Setup button in the AP Router Mode setup page (Figure 5.2) to access the Access

Filter page. The Access Filter page allows the user to configure T600 to allow or deny association to itself

based on the MAC address of the client. Up to 32 MAC addresses can be added to the list. Figure 5.6 and

Table 5.5 detail the options.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 52 53

No comments

Netac Tech T600 User Manual Page 20