Netac Tech T600 User Manual download pdf (Page 42)

Netac AirTrack T600 Mini Wireless Router

Figure 8.3 Client Mode - LAN Page

CAUTION: Selecting the Automatic IP option is not advised unless the user has direct access to the device

that provides the IP address. Be sure to know how to distinguish the IP address of T600 from that of a

connected device before selecting this option. This is important regardless of T600 operating mode.

Table 8.2 Client Mode - LAN Page Options

Field Description

Device Name

Allows the user to assign a friendly device name to access T600. For example in

Figure 8.3, both http://AirTrackT600N1 and http://192.168.1.1 can be used to open

the configuration webpages of the device.

NOTE: To configure T600, the user must access T600 from a PC that is on the

same subnet.

Automatic IP

Configure the device to use an automatic (DHCP) IP address.

NOTE: Selecting the Automatic IP option is not advised unless the user has direct

access to the device that provides the IP address.

Fixed IP

Default option. Values of the IP Address, Subnet Mask, and Gateway fields must

be specified.

IP Address Set the IP address of T600.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 52 53

No comments

Netac Tech T600 User Manual Page 42